GARAGE EQUIPMENT DIVISION

TECHNICAL SPECIFICATIONS


Power Supply 110VAC or 12VDC
Car Mode Balancing Speed < 100 rpm
Truck Mode Balancing Speed < 70 rpm
Car Mode Balancing Accuracy < 0.1 oz (< 1 g)
Truck Mode Balancing Accuracy < 1 oz (< 10 g)
Car Mode Average Cycle Time 8 seconds
Truck Mode Average Cycle Time 20 seconds
Rim Diameter Capacity 10" - 30" (265 - 765 mm)
Rim Width Capacity 1.5" - 20" (40 - 510 mm)
Max. Wheel Weight 550 lbs (250 kg)
Max. Tire Diameter 51" (1,295 mm)
Operating Temperature 32 - 113°F (0 - 45°C)
Shaft Size 40 mm
Gross Ship. Weight 371 lbs (170 Kg)
LOCK NUT

Lock nut with handwheel

CUP + PRESS. RING

Reverse mounting cup with no mar-ring + Pressure ring

CONES

4 cones covering hole sizes 1.69” (43mm) to 5.2” (132mm)

2P TRUCK C.K.

2 piece truck cone kit for light truck wheels for hole from 3.82" (97mm) to 7.09" (180mm)

CONE IV + GG

Cone IV + GG ring to centre truck or bus wheelswith a centre hole from 7.95" (202mm) to 8.70" (221mm)

CALIPER

Rim width gauge for measuring wheel width

SHAFT

40mm threaded shaft

WEIGHT PLIERS

Can be used as balanced weight hammer, cutting pliers for trimming wheel weights, and puller to remove the old wheel weights

TEST WEIGHT
ALLEN WRENCH

8mm allen wrench to mount the 40mm threaded shaft

HAND SPIN

Zero effort hand spin. A reduction gear reduces the effort of the operator during the wheel spin also with the heaviest and biggest wheels.

MANUAL LIFT

The lift handle allows to change the height of the shaft from the ground by reduced force to mount/demount and stop the wheel.

WHEELS

Wheels for easier placement

CAR ADAPTORS

SRU

Universal stud adaptor (for wheels with 3-4-5-6 holes, 75-210mm bolt pattern)

UH20/2

CEMB PATENT - Universal bolt pattern adaptor (for wheels 3-4-5 holes or without center hole)

WD + DC

WD wheel support spacer for very wide wheels + DC spring pusher bush

RL CUP + RING

Large diameter plastic cup for alloy rims protection (8.11"/206mm for alloy rims, includes no-mar ring)

SR USA

Stud adapter for rim protection and high precision (for lug centric wheels) for standard locking



















TRUCK ADAPTORS

CONE V Europe

Cone V to centre truck or bus wheels with a centre hole of 11.06" (281mm)

SR215/2

To Centre wheels with 8 holes on Ø10.8”/11.25” (Ø275/285.75mm) and with 10 holes on Ø10.8”/11.25”/13.2” (Ø225/285.75/335mm)

DAYTON 20-22.5"

Wheel adaptor for wheels 20" and 22.5"

DAYTON 22-24.5"

Wheel adaptor for wheels 22" and 24.5"

G40 WING NUT

Steel wing nut with extended wings usable as alternative to the standard wing nut. Allows a greater tightening torque

ACCESSORY RACK

Storage accessory rack for truck adaptors



MOBILE HAND SPIN TRUCK AND BUS WHEEL BALANCER

For all on-site tire balancing businesses offering mobile tire repair and wheel balancing services. CEMB's C206 comes fully assembled.

  • Mobile Hand Spin Truck Wheel Balancer for cars and light & commercial trucks
  • C206 balances HD truck and bus tires as well as light truck and car tires
  • Portable for mobile service when 12VDC available
  • Automatic Distance & Diameter Entry (2D)
  • Standard lightweight battery pack for use when power not available
  • Self-Diagnosis and Self-Calibration
  • Menus for quick selection of the following:
    inches to millimeters
    unbalanced thresholds 0.1 or 0.25 ounces (1 or 5g)
  • Direct selection ounces/grams
  • Optimization program for compensation of rim and tire unbalance
  • "Static" program--plus 4 ALU programs for PAX, light alloy or special shaped rims
  • One Button Split & Hidden Weight Program
  • Direct weight location program (no repositioning of stick-on weights)