ZBTOK20/2UO-A/C
THREE STATION BALANCING MACHINE EQUIPPED BY AN AXIAL DRILLING CORRECTION UNIT FOR ELECTRIC ROTORS
Balancing system for electric rotors consisting of three stations, one for loading/unloading, one for unbalance measurement on two planes with belt drive and one unbalance correction station for axial drilling on the sides through two opposed units with controlled axes.
Three station balancing isle for automotive electric motors where the first station is a loading/unloading spot where the rotor is placed either manually or through a robot.
An internal loader takes and transfers the rotor to the second station where the unbalance is measured and, immediately after, corrected by axial drilling on the two balancing ring on the two sides of the rotor stack.
After the correction, the same station also performs the check spin and, if in tolerance, the loader transfers it to the third station where the traceability information are transferred on a QR on the rotor by laser marking.
At the end of this operation the loader places the piece back to the loading/unloading station to be returned to the production line.
- Approx overall dimensions:
- Width: 8.7 feet
Depth: 9 feet
Height: 7.4 feet
